Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to block IP communicator from registering in CME

Customer wants to block some users PC(IP Communicator)not to register in CME

5 REPLIES

Re: How to block IP communicator from registering in CME

Disable auto registration and remove the ephone configured with their MAC address.

Brandon

New Member

Re: How to block IP communicator from registering in CME

If you can tell the command to disable the auto registration it is great help.

Thanks

Re: How to block IP communicator from registering in CME

The commands are:

router#conf t

router(config)#telephony-service

router(config-telephony)#no auto assign

Hope this helps.

Brandon

Re: How to block IP communicator from registering in CME

Technically the phone will still register. It just won't get a DN. As well, you can specify multiple ranges so you would need to delete the specific range that has been defined.

The command you're looking for is:

telephony-service

no auto-reg-ephone

As said previously, make sure there isn't an ephone with the mac address defined. You'll need to delete that.

hth,

nick

New Member

Re: How to block IP communicator from registering in CME

Thanks.

259
Views
5
Helpful
5
Replies
CreatePlease login to create content