Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to busyout B-channel on PRI with MGCP on CCM 4.1.3

I need to busyout the b-channels on all the T1-PRI's on a WS-SVC-CMM Cat6k voice linecard. I have these configured using MGCP signaling with CCM 4.1.3sr4d

There are active calls on the T1's and I would like to busyout the channels when the call completes.

Any help is greatly appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: How to busyout B-channel on PRI with MGCP on CCM 4.1.3

Hi Anthony,

You can gracefully busy-out (graceful out-of-service) B-channels for troubleshooting purposes. This document discusses how to busy-out B-channels from a Cisco CallManager for Media Gateway Control Protocol (MGCP) controlled T1 or E1 voice ports.

From this excellent doc;

Busy-Out ISDN B-Channels in Cisco CallManager Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008076f8d2.shtml

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: How to busyout B-channel on PRI with MGCP on CCM 4.1.3

Hi Anthony,

You can gracefully busy-out (graceful out-of-service) B-channels for troubleshooting purposes. This document discusses how to busy-out B-channels from a Cisco CallManager for Media Gateway Control Protocol (MGCP) controlled T1 or E1 voice ports.

From this excellent doc;

Busy-Out ISDN B-Channels in Cisco CallManager Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008076f8d2.shtml

Hope this helps!

Rob

New Member

Re: How to busyout B-channel on PRI with MGCP on CCM 4.1.3

Rob,

Thanks for the excellent information. One additional question...

How can I see if the channel is currently active and when it gets gracefully busied?

This gateway is a Cat6500 CMM blade.

New Member

Re: How to busyout B-channel on PRI with MGCP on CCM 4.1.3

I don't have in it front of me, but try

show voice call summary

738
Views
0
Helpful
3
Replies
CreatePlease login to create content