How to CallForwardAll from an alalog device in CallManager

[rafael.cortes_2]

We are running CCM 4.1.3. We have a couple of analog phones, one connected to an fxs port and the other to an ATA 186. Is there a way through a button sequence to do a CallForwardAll on the analog device?

[Rob Huffman]

Hi Rafael,

For the ATA running SCCP and FXS running SCCP (Supplementary services) Call Forward All is **1 then the number Call Forward All Cancel is **2;

Activate Call-Forward-All

Use this feature to send all calls from one telephone number to another telephone number. To activate Call-Forward-All, follow these steps:

Procedure

--------------------------------------------------------------------------------

Step 1 Press ** then 1 on your telephone keypad. You will receive a confirmation tone.

Step 2 Enter the telephone number to which you want to send the calls. A confirmation tone will sound.

Step 3 Hang up.

From this good SCCP doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/user.html#wp1014659

For FXS;

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html

Hope this helps!

Rob