how to change dn of the calling to be show on the called as random DN

[csco11904392]

i have one user asking me is there any way to run the below senario :

when ex 3111 dial 3333 ,the called number should be showed on 3333 as random number 3 XXX not 3111 

best regards

ahmed

[Venkatesh Perumal]

Hi,

Apply Calling party Transformation on route pattern configuration.

Refer below link for more detail:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b03trpat.html

Regards,

Venkatesh

[csco11904392]

hi venperum

as my senario no need to create route pattern because it is locally  

[bernhardczapp]

Hello Ahmed,

I don't think it's possible to replace the last 3 digits of the calling party number with random digits within CUCM.

Depending on what you are trying to achieve there might be another solution.

Maybe something like:

• a script using axl to modify a translation pattern every few minutes/seconds
• an ios gateway with tcl script to randomize the calling number
• a 3rd party system to randomize the number

[csco11904392]

hi bernhardczapp

i want to use for internal call 

[Jaime Valencia]

FYI, provide a clear call flow if you are going to ask for help.

I believe you're asking about internal extensions, right????

If so, you can use translation patterns to do the above.

One caveat, there's absolutely no way to randomize the number, it's going to be hard coded by what you configure.

[csco11904392]

hi Jaime Valencia

yes about internal extension