Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to change the CUCM admin page idle logout time

Can you change the CUCM administration page idle logout time? If so, how? I'm working on this is a lab and every time I step away to do something, I have to log back in. Can I increase the time for automatic logout? This is CUCM 6.0.1. Thanks.

4 REPLIES
Cisco Employee

Re: How to change the CUCM admin page idle logout time

No, you can't.

It's fixed at 30 minutes

This has been asked before, please search NetPro for answers.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: How to change the CUCM admin page idle logout time

Thanks. I was afraid that might be the answer. I did search this before posting. Maybe I was using the wrong keywords. I used CUCM unified communications manager 6.0 administration page idle timeout logout. Any others I could have used for future reference? Thanks.

Cisco Employee

Re: How to change the CUCM admin page idle logout time

Way too many words, use less words but use keywords.

You should have tried: ccmadmin + timeout

The same for any future question you might have, use just 2-3 keywords, if you try such complex searches there are very low chances you'll get a hit.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

I know this may not be for v6

I know this may not be for v6 but works on 11
show cli session timeout set cli session timeout <min> show webapp session timeout set webapp session timeout <min>
1158
Views
9
Helpful
4
Replies
CreatePlease to create content