Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to config Lawful Intercept

I have to config Lawful Intercept on 7600, IOS version 12.2(33)SRC6. Every step have be taken by "Cisco 7600 Lawful Intercept Configuration Guide".

Such as:

Router(config)# snmp-server view tapV ciscoTap2MIB included

Router(config)# snmp-server view tapV ciscoIpTapMIB included 
Router(config)# snmp-server group tapGrp v3 auth read tapV write tapV notify tapV 
Router(config)# snmp-server user ss8user tapGrp v3 auth md5 ******** 
Router(config)# snmp-server engineID local 1234
......
Then 
Router#show snmp mib
There are:

citapStreamCapabilities

citapStreamInterface

.

.

.

cTap2MediationNewIndex

cTap2MediationDestAddressType

cTpa2MediationDessAddress

.

.

.

and so on

BUT

when I exec snmpwalk from snmp manager, most of LI objects have disappeared.

for example:

>snmpwalk -v 3 -U user -l authNoPriv -a md5 -A ******** 172.10.1.1 1.3.6.1.4.1.9.9.399

SNMPv2-SMI::enterprises.9.9.399.1.1.1.0 = INTEGER:1

SNMPv2-SMI::enterprises.9.9.399.1.1.3.0 = Hex-STRING:A0 00

SNMPv2-SMI::enterprises.9.9.399.1.3.1.0 = INTEGER:2

SNMPv2-SMI::enterprises.9.9.399.1.3.2.0 = INTEGER:100

where is cTap2MediationDestAddressType (1.3.6.1.4.1.9.9.399.1.1.2.1.2)?

Also cTap2MediationDestAddressType can't be set with snmpset.

So, config failed? or these objests should be created? or something?

This is what I came up with so far, if anyone can add to the list, I would appreciate it.

riddick

1 REPLY
New Member

how to config Lawful Intercept

anyone help?

297
Views
0
Helpful
1
Replies