How to configure a line group with hunt pilot

[reg_cisco]

I configured a new line group with two DN then I configured a Hunt list with associating this line group and then I created a hunt pilot with another dial number and associating this Hunt list but when I call hunt pilot DN, call doesn't jump to the other extension configured in the line group.

What's wrong?. Thanks.

[Chris Deren]

what routing method did you choose on the line group, ie top down? Make sure the hunt timer on pilot is greater than the line group.

Sent from Cisco Technical Support iPhone App

[Chris Deren]

what routing method did you choose on the line group, ie top down? Make sure the hunt timer on pilot is greater than the line group.

Sent from Cisco Technical Support iPhone App

[ronpatel]

Hi

Also

Have you restarted the Hunt list after its configuration?

Regards

Ronak patel