Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to configure a line group with hunt pilot

I configured a new line group with two DN then I configured a Hunt list with associating this line group and then I created a hunt pilot with another dial number and associating this Hunt list but when I call hunt pilot DN, call doesn't jump to the other extension configured in the line group.

What's wrong?. Thanks.

3 REPLIES
Hall of Fame Super Silver

Re: How to configure a line group with hunt pilot

what routing method did you choose on the line group, ie top down? Make sure the hunt timer on pilot is greater than the line group.

Sent from Cisco Technical Support iPhone App

Hall of Fame Super Silver

Re: How to configure a line group with hunt pilot

what routing method did you choose on the line group, ie top down? Make sure the hunt timer on pilot is greater than the line group.

Sent from Cisco Technical Support iPhone App

Blue

How to configure a line group with hunt pilot

Hi

Also

Have you restarted the Hunt list after its configuration?

Regards

Ronak patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
239
Views
0
Helpful
3
Replies
CreatePlease login to create content