Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to configure a special Incondicinal Forward

I want to configure an incondicional forward from a phone to other that it can't be possible to disable by user with the corresponding softkey.

Is it possible?. How?.

I use CCM 4.1.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: How to configure a special Incondicinal Forward

Hi Carlos,

I thought that this was an interesting question :) Here is how I just set this up.

1. Configure a New Softkey Template (I called mine NoCfwdAccess)

2. On this new Template move the Forward All (CFWD) over to Unselected Softkeys/Update

3.Apply this new Softkey Template to the Phone in question. Now it has no CFWDALL Softkey

4. From the Directory Number Configuration Page for this Phone, Apply the Extension you want this phone to Call Forward All to and Update/Reset

5. This phone now shows Forwarded to xxxx with no ability to change this.

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: How to configure a special Incondicinal Forward

Hi Carlos,

I thought that this was an interesting question :) Here is how I just set this up.

1. Configure a New Softkey Template (I called mine NoCfwdAccess)

2. On this new Template move the Forward All (CFWD) over to Unselected Softkeys/Update

3.Apply this new Softkey Template to the Phone in question. Now it has no CFWDALL Softkey

4. From the Directory Number Configuration Page for this Phone, Apply the Extension you want this phone to Call Forward All to and Update/Reset

5. This phone now shows Forwarded to xxxx with no ability to change this.

Hope this helps!

Rob

New Member

Re: How to configure a special Incondicinal Forward

Thanks, It works fine

109
Views
0
Helpful
2
Replies