Hi All,
Trying to find examples of configuring SIP phones (3905,7821,8945,8961) with site wide paging but can only see SCCP configuration
The phones are configured on CME 10 as shown below:
##########################
voice register dn 1
number 243
voice register pool 1
id mac 2C3E.CF77.384A
type 3905
number 1 dn 1
dtmf-relay rtp-nte sip-notify
username cisco password cisco
codec g711alaw
no vad
###################
Do I create an ephone-dn as shown below:
--------------------------
ephone-dn 50
number 500 no-reg primary
description PAGING
name PAGING
paging ip 239.0.1.20 port 2000
-------------------------------------
and then apply the paging-dn 50 command to the voice register pool 1 device?
Many thanks in advance
