Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to configure CME 10.0 SIP phones to use Paging ?

Hi All,

Trying to find examples of configuring SIP phones (3905,7821,8945,8961) with site wide paging but can only see SCCP configuration

The phones are configured on CME 10 as shown below:

##########################

voice register dn  1
 number 243

 

voice register pool  1
 id mac 2C3E.CF77.384A
 type 3905
 number 1 dn 1
 dtmf-relay rtp-nte sip-notify
 username cisco password cisco
 codec g711alaw
 no vad

###################

Do I create an ephone-dn as shown below:

--------------------------

ephone-dn 50

number 500 no-reg primary

description PAGING

name PAGING

paging ip 239.0.1.20 port 2000

-------------------------------------

and then apply the paging-dn 50 command to the voice register pool  1 device?

Many thanks in advance

85
Views
0
Helpful
0
Replies