05-22-2009 10:52 AM - edited 03-15-2019 06:09 PM
Hi ,
I have CUCM Version 6.1(3) and i can;t find a way to dialing 0 from any phone and it's will be routed to the reception extn.
Any ideas ?
Thanks
05-22-2009 10:57 AM
Create a translation profile that translates 0 to the DN of the receptionist's phone.
Hope this helps.
Brandon
05-22-2009 11:03 AM
Hi Thanks For the reaply ,
I have must to using a Gateway to make a
translation profile , don't forget that is version 6.1(3) . there is not translation profile only route pattern .
But still it's don't working .
05-22-2009 11:04 AM
I should have said translation pattern not profile.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b03txpat.html
Hope this helps.
Brandon
05-22-2009 11:11 AM
OK , i saw it
Thanks Allot !!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide