Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to Configure Dialing 0 For Operator

Hi ,

I have CUCM Version 6.1(3) and i can;t find a way to dialing 0 from any phone and it's will be routed to the reception extn.

Any ideas ?

Thanks

4 REPLIES
VIP Purple

Re: How to Configure Dialing 0 For Operator

Create a translation profile that translates 0 to the DN of the receptionist's phone.

Hope this helps.

Brandon

Community Member

Re: How to Configure Dialing 0 For Operator

Hi Thanks For the reaply ,

I have must to using a Gateway to make a

translation profile , don't forget that is version 6.1(3) . there is not translation profile only route pattern .

But still it's don't working .

VIP Purple

Re: How to Configure Dialing 0 For Operator

I should have said translation pattern not profile.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b03txpat.html

Hope this helps.

Brandon

Community Member

Re: How to Configure Dialing 0 For Operator

OK , i saw it

Thanks Allot !!!

284
Views
0
Helpful
4
Replies
CreatePlease to create content