Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to configure em-hda-6fxo on CUCM

Hi, help me please, I have cisco 2951 router with module EVM-HD-8FXS/DID and two EM-HDA-6FXO cards inserted into EVM-HD-8FXS/DID. When I tried to configure these cards in CUCM 8.6 by skinny, I couldn't see EM-HDA-6FXO card in the listbox. em-hda-6fxo.JPG

Did somebody had the same problems? How to configure EM-HDA-6FXO card in this situation?

Thanks, everybody

  • IP Telephony
2 REPLIES
Hall of Fame Super Gold

Re: How to configure em-hda-6fxo on CUCM

For the FXO interfaces, you should use H.323 or SIP for best results.

The FXS can be SCCP is you desire additional services to the analog phones.

You can use different protocols for each interface even on the same physical card or slot.

Hall of Fame Super Silver

How to configure em-hda-6fxo on CUCM

Correct,  there is not support for FXO ports via SCCP.

Chris

538
Views
0
Helpful
2
Replies