09-23-2013 11:58 PM - edited 03-16-2019 07:30 PM
Hi,
Is it possible to have this kind of configuration on UC560, for example specific range of extensions (e.g. from 200 to 299) to make outgoing calls through specific FXO (e.g. FXO 0/0 and FXO 0/1), whereas other range of extensions (e.g. from 300 to 399) to make outgoing calls through other FXO-s (e.g. FXO 0/2 and 0/3)?
If yes, how can I do that with cisco configuration assistant?
Thank you.
Bj
Solved! Go to Solution.
09-24-2013 08:47 PM
Here
https://supportforums.cisco.com/docs/DOC-26186
This document explains what you need to do very well.
09-24-2013 01:01 AM
Is it possible ?
Yes
With Cisco Configuration Assistant ?
No
Using CLI you will need to customize all
dial-peer cor list
dial-peer voice pots
ephone-dn
voice-ports
09-24-2013 04:19 AM
Hi Mario,
Thank you for your reply.
It would be very helpfull if you colud give me an example of how to achive that.
Thank you
Brj
09-24-2013 05:54 AM
Here you go:
Mapping Outbound Calls to Unique FXS/FXO Ports on Analog Gateways
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
HTH
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
09-24-2013 07:02 AM
Thanks Jorge,
I will see if that would solve my problem.
regards,
Brj
09-24-2013 08:47 PM
Here
https://supportforums.cisco.com/docs/DOC-26186
This document explains what you need to do very well.
09-24-2013 11:58 PM
Thank you very much Mario.
It is a very helpful document.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: