Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to configure UC560?

Hi,

Is it possible to have this kind  of configuration on UC560, for example specific range of extensions  (e.g. from 200 to 299) to make outgoing calls through specific FXO (e.g.  FXO 0/0 and FXO 0/1), whereas other range of extensions (e.g. from 300  to 399) to make outgoing calls through other  FXO-s (e.g. FXO 0/2 and   0/3)?

If yes, how can I do that with cisco configuration assistant?

Thank you.

Bj

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

How to configure UC560?

Here

https://supportforums.cisco.com/docs/DOC-26186

This document explains what you need to do very well.

6 REPLIES
New Member

How to configure UC560?

Is it possible ?

Yes

With Cisco Configuration Assistant ?

No

Using CLI you will need to customize all

dial-peer cor list

dial-peer voice pots

ephone-dn

voice-ports

New Member

How to configure UC560?

Hi Mario,

Thank you for your reply.

It would be very helpfull if you colud give me an example of how to achive that.

Thank you

Brj

How to configure UC560?

Here you go:

Mapping Outbound Calls to Unique FXS/FXO Ports on Analog Gateways

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml

HTH

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
New Member

How to configure UC560?

Thanks Jorge,

I will see if that would solve my problem.

regards,

Brj

New Member

How to configure UC560?

Here

https://supportforums.cisco.com/docs/DOC-26186

This document explains what you need to do very well.

New Member

How to configure UC560?

Thank you very much Mario.

It is a very helpful document.

595
Views
6
Helpful
6
Replies
CreatePlease login to create content