Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to connect two router with E&M cards

Hello,

I have two router : a 3745 with VIC-2E&M and a 1751V with VIC-2E&M.

I want to tranfer call from the 1751V to the 3745 with these cards.

(router )E&M <-> E&M (router)

Is it possible?

How to do? How about connector and pinouts

Thenk you very much.

4 REPLIES
Cisco Employee

Re: How to connect two router with E&M cards

Make sure the router chassis have a common electrical ground connection (very important for E&M) and use a console rollover cable. Refer here for details -

http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080093f5e.shtml#rollovercable

This will allow you to make calls between the two devices. E&M trunks won't give you supplementary services like transfer/hold/call forward.

New Member

Re: How to connect two router with E&M cards

Thank you very much.

Hall of Fame Super Gold

Re: How to connect two router with E&M cards

New Member

Re: How to connect two router with E&M cards

Thank you very much.

All your responsee have resolved my issue.

Thank you

Thank you

Thank you

333
Views
10
Helpful
4
Replies
CreatePlease login to create content