07-23-2013 06:46 PM - edited 03-16-2019 06:31 PM
I have a 2801 router that used to run CCM. It no longer requires any voices services and the voice service is now outsourced. How do I remove these voice ports:
voice-port 0/0/0
!
voice-port 0/0/1
caller-id enable
!
voice-port 0/0/2
caller-id enable
!
voice-port 0/0/3
caller-id enable
!
voice-port 0/1/0
caller-id enable
!
voice-port 0/1/1
caller-id enable
!
voice-port 0/1/2
caller-id enable
!
voice-port 0/1/3
Thank you,
Solved! Go to Solution.
07-23-2013 06:58 PM
You can admin down them (doing a shut), but to remove them fully, remove the cards (assuming these are 4FXS or FXO ports). also you might want to remove the DSP modules in the router.
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================
07-23-2013 06:58 PM
You can admin down them (doing a shut), but to remove them fully, remove the cards (assuming these are 4FXS or FXO ports). also you might want to remove the DSP modules in the router.
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================
07-24-2013 10:27 PM
Why a 100% correct answer, made with the will to help had been rated just a "3". I've rated it again to partially compensate.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: