Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to disable voice-port 0/0/0 and others

I have a 2801 router that used to run CCM. It no longer requires any voices services and the voice service is now outsourced. How do I remove these voice ports:

voice-port 0/0/0

!

voice-port 0/0/1

caller-id enable

!

voice-port 0/0/2

caller-id enable

!

voice-port 0/0/3

caller-id enable

!

voice-port 0/1/0

caller-id enable

!

voice-port 0/1/1

caller-id enable

!

voice-port 0/1/2

caller-id enable

!

voice-port 0/1/3

Thank you,

1 ACCEPTED SOLUTION

Accepted Solutions

how to disable voice-port 0/0/0 and others

You can admin down them (doing a shut), but to remove them fully, remove the cards  (assuming these are 4FXS or FXO ports). also you might want to remove the DSP modules in the router.


=============================
Please remember to rate useful posts, by clicking on the stars below.

=============================

Please remember to rate useful posts, by clicking on the stars below.

2 REPLIES

how to disable voice-port 0/0/0 and others

You can admin down them (doing a shut), but to remove them fully, remove the cards  (assuming these are 4FXS or FXO ports). also you might want to remove the DSP modules in the router.


=============================
Please remember to rate useful posts, by clicking on the stars below.

=============================

Please remember to rate useful posts, by clicking on the stars below.

Hall of Fame Super Gold

how to disable voice-port 0/0/0 and others

Why a 100% correct answer, made with the will to help had been rated just a "3". I've rated it again to partially compensate.

1160
Views
3
Helpful
2
Replies