Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

How to disassemble a 7942 phone / clean hook switch

Hello,

does anyone have a guide how to disassemble a 7942/62 phone without damaging it?

Would be nice to know for example to clean the phone or to repair / replace hook switch.

Thanks,

Bernhard

Everyone's tags (2)
3 REPLIES
New Member

How to disassemble a 7942 phone / clean hook switch

You may have seen this, but I'll throw the link in for good measure.   https://supportforums.cisco.com/thread/2009132

There are two screws towards the top on the back of the phone (pretty obvious holes.)    Then there are two more screws under the ruber feet the the phone body rest on.

TONY

How to disassemble a 7942 phone / clean hook switch

The 7942 seems to be different.

There are:

4 Screws on the back.

At the front:

-one at the hook switch

-there seem to be more screws under the bezel (around the display). Unfortunately I don't know how to remove the bezel.

Hall of Fame Super Red

How to disassemble a 7942 phone / clean hook switch

Hi Bernhard,

I just took apart a broken 7942 to test the method, but

it seems like they may have changed the design at some point

as this one had 9 screws on the back and a plastic clip on the side

housing to the left of the Hookswitch. It seems like your 7942 may be

more like the method described here

http://atc.go0se.com/?p=1034

Cheers!

Rob

"When it comes to luck you make your own  " 

- Springsteen

1643
Views
0
Helpful
3
Replies
CreatePlease login to create content