cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
562
Views
0
Helpful
1
Replies

How to disconnect an active T1 call in MGCP

Michael Ricci
Level 1
Level 1

I have a call that seems to be hanging on the T1 controller. I am running MGCP to the CUCM, how do I disconnect the single channel without disconnecting the rest of them? (Channel 23)

(Routerhostname)#sho voice port summary | inc 0/1/0:23
0/1/0:23       01  xcc-voice   up    up   none     none     y
0/1/0:23       02  xcc-voice   up    up   none     none     y
0/1/0:23       03  xcc-voice   up    up   none     none     y
0/1/0:23       04  xcc-voice   up    up   none     none     y
0/1/0:23       05  xcc-voice   up    up   none     none     y
0/1/0:23       06  xcc-voice   up    up   none     none     y
0/1/0:23       07  xcc-voice   up    up   none     none     y
0/1/0:23       08  xcc-voice   up    up   none     none     y
0/1/0:23       09  xcc-voice   up    up   none     none     y
0/1/0:23       10  xcc-voice   up    up   none     none     y
0/1/0:23       11  xcc-voice   up    up   none     none     y
0/1/0:23       12  xcc-voice   up    up   none     none     y
0/1/0:23       13  xcc-voice   up    dorm none     none     y
0/1/0:23       14  xcc-voice   up    dorm none     none     y
0/1/0:23       15  xcc-voice   up    dorm none     none     y
0/1/0:23       16  xcc-voice   up    dorm none     none     y
0/1/0:23       17  xcc-voice   up    dorm none     none     y
0/1/0:23       18  xcc-voice   up    dorm none     none     y
0/1/0:23       19  xcc-voice   up    dorm none     none     y
0/1/0:23       20  xcc-voice   up    dorm none     none     y
0/1/0:23       21  xcc-voice   up    dorm none     none     y
0/1/0:23       22  xcc-voice   up    dorm none     none     y
0/1/0:23       23  xcc-voice   up    up   none     none     y

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Michael,

Have a look at this good doc. You will need to have set this up and reset

the Gateway at least once for it to work. But this may really help you moving

forward

Busy-Out ISDN B-Channels in Cisco CallManager Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008076f8d2.shtml

Cheers!

Rob