Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to do conference in telephone analog with an VG224 gateway?

hello everybody


i have a question, how to do conference in telephones analog with an VG224 gateway?

this is my configuracion:


stcapp feature access-code
prefix *
!
stcapp feature speed-dial
!
!
!
stcapp call-control mode feature
.
:
:
ccm-manager redundant-host 10.92.36.6 10.92.36.4
ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server 10.92.36.7 
ccm-manager config
ccm-manager sccp local FastEthernet0/0
ccm-manager sccp
!
sccp local FastEthernet0/0
sccp ccm 10.92.36.6 identifier 2 priority 2 version 7.0
sccp ccm 10.92.36.7 identifier 1 priority 1 version 7.0
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
switchback method graceful
!
!
dial-peer voice 999200 pots
service stcapp
port 2/0

i´m registered the VG with a CUCM 8.6 with SCCP protocol

3 REPLIES
Hall of Fame Super Silver

Re: how to do conference in telephone analog with an VG224 gatew

Is analog phone initiating the conference? If so use the SCCP supplementary code.

Sent from Cisco Technical Support iPhone App

New Member

how to do conference in telephone analog with an VG224 gateway?

yes, i want initiating a conference with the analog phone.

Hall of Fame Super Silver

how to do conference in telephone analog with an VG224 gateway?

"During an active call, user presses hookflash for dial tone, dials a third party, and then presses hookflash again to connect all three parties.

Note For ad-hoc conferencing on Cisco Unified SCCP IP phones, the #3 feature code is required for the "conference" call-control mode after pressing hookflash the first time."

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html

HTH, please rate all useful posts!

Chris

412
Views
0
Helpful
3
Replies