Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

how to enable the message key in CUE router?

I hav a CUE router, can I enable the message key for accessing my voicemail?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: how to enable the message key in CUE router?

Hi Jose,

Here is the related info;

SCCP: Configuring a Voice Mailbox Pilot Number

To configure the telephone number that is speed-dialed when the Message button on a SCCP phone is pressed, perform the following steps.

--------------------------------------------------------------------------------

Note The same telephone number is configured for voice messaging for all SCCP phones in Cisco Unified CME.

--------------------------------------------------------------------------------

SUMMARY STEPS

1. enable

2. configure terminal

3. telephony-service

4. voicemail phone-number

5. end

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevmail.html#wp1016513

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: how to enable the message key in CUE router?

Hi Jose,

Here is the related info;

SCCP: Configuring a Voice Mailbox Pilot Number

To configure the telephone number that is speed-dialed when the Message button on a SCCP phone is pressed, perform the following steps.

--------------------------------------------------------------------------------

Note The same telephone number is configured for voice messaging for all SCCP phones in Cisco Unified CME.

--------------------------------------------------------------------------------

SUMMARY STEPS

1. enable

2. configure terminal

3. telephony-service

4. voicemail phone-number

5. end

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevmail.html#wp1016513

Hope this helps!

Rob

Community Member

Re: how to enable the message key in CUE router?

Thanks, Rob.

112
Views
0
Helpful
2
Replies
CreatePlease to create content