03-13-2014 07:00 AM - edited 03-18-2019 11:22 AM
Hi,
I just received lots of cisco 6921 phones.
When i add them to network they auto register but Enable Extension Mobility is turned off.
So how can I enable extension mobility by default so that phone auto register to be ready to use?
Regards,
Ivan
Solved! Go to Solution.
03-13-2014 06:40 PM
It´s not possible to set that for auto-registered phones on your version.
03-13-2014 07:14 AM
03-13-2014 07:23 AM
Thanks for response.
Yes we use CCUM, but that I can do when the phones are already added to network.
I just want to add phones and username and password to user, and when the put them out of box that they can use it immediately…
03-13-2014 07:29 AM
You need to configure |Extension Mobility Profiles (device profiles). You also need to configure EM service. You then need to associate users to their EM profiles and subscribe your phones to the EM service. Once all this is done, your users can login to the phone and use EM
03-13-2014 09:45 AM
Hi,
i know that.
All i want is to have on new auto registred phones enabled extension mobility checkbox by default :-)
03-13-2014 06:40 PM
It´s not possible to set that for auto-registered phones on your version.
03-14-2014 12:10 AM
03-13-2014 09:17 AM
Ivan,
With CUCM 10.0, you can configure default device templates for auto-registration such that extension mobility will automatically be enabled.
I'm not sure of a way to do this pre-10.0.
Brian
03-13-2014 09:42 AM
Hi Brian,
thanks for sugestion but in CCM 7.1.5 there is no enable extension mobility in device template :-(
Ivan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide