Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to find the switch the ip phone is connected

hi.

What are the ways available to find out which switch the phone is connected to?

I know the ip address of the IP Phone, I can trace rout to the ip phone IP , but i want to know whether in the ccm , we can find which switch ip phone connected to ?

regards

esa

3 REPLIES

Re: How to find the switch the ip phone is connected

Hello,

You wouldnt be able to find this info in CCM. However, from the branch router in which the phone is located, you can issue a:

show mac-address-table address [H.H.H] (mac of phone)

The output will most likely point to your ethernet port in which your switch is connected. Telnet to that switch and issue the same command..if the port referenced in the output is connected to another switch..telnet to said switch and issue the command until you can go no further.

Hope that helped, if so please rate.

Community Member

Re: How to find the switch the ip phone is connected

HTTP to the Phone:

http://

then go to Network Stattictics>Network.

at the bottom part you can see the switch and the port where this ip phone is connected.

How to find the switch the ip phone is connected

Hi Essa,

It's possible but the phone has to been enabled for web access the device level

after you the webpage

go to:

Ethernet Statistics ---> Network

you will find the

A.) ip address of the Access switch

B.) Domain name of the Acces swicth

C.) Connected Port

Ethernet Statistics ---> Access

you will find the

A.) ip address of the PC

B.) Domain name of the PC

C.) Duplex

This only applies of the phone is connected to PC

Rate

Best of Luck

Ethernet Statistics

Ethernet Statistics

1809
Views
7
Helpful
3
Replies
CreatePlease to create content