Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to hide incoming dial number

I want to hide the dial number of a phone when it call to other. Only dial number not Display (Internal Caller ID).

Is it possible. How?. I use CCM 4.1

Thanks.

4 REPLIES
Hall of Fame Super Silver

Re: How to hide incoming dial number

Yes, it is possible. Route the calls via a translation pattern set with appropriate settings, i.e. "connected Line ID presentation" to diabled.

Find more details here:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmsys/a03rp.htm#wp1051056

HTH,

Chris

New Member

Re: How to hide incoming dial number

Thanks but I forgot say to you that I only wanto to hide dial number for internal calls.

Do you give me the same solution now?.

Hall of Fame Super Silver

Re: How to hide incoming dial number

Yes, use tranlsation patterns for internal calls. For example assuming you want to hide dial (not sure if you mean calling or called) number for anyone calling 4 digit dialing where your internal DNs are in the 2XXX, 3XXX range you would create a TP of [23]XXX and set the restrictions there. Make sure that the phone's CSS has only access to the Parition assigned to this TP and not to the phone PT.

Chris

New Member

Re: How to hide incoming dial number

Really, I want to hide 7020 dial number so I added a TP 702X with a internal partition and the correct css and in calling Party Transformations I choosed restricted Calling Line ID Presentation but when I call from 7020 dial number to other phone, dial number appear in the screen. I don't know what is wrong.

180
Views
8
Helpful
4
Replies