Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to make a conference with a VG350 in a polycom phone?

good day to all engineers!

I have a polycom phone which another PBX ( Siemens) could do first conference marking the extention and then pressing the flash key and typed the extention * 3 copn this procedure to the conference .

We migrated the analog telephony with new VG350 , I found in internet commands to schedule conferences in VG350 , but I can not make the conference I can only transfer to other extensions , any suggestions on this?

these are the commands to enable itilice :

VG_AGS1_11 (config ) # stcapp call- monitoring mode feature

VG_AGS1_11 (config- stcapp - FMCODE ) # * 3 conference

VG_AGS1_11 (config- stcapp - FMCODE ) # end

VG_AGS1_11 feature code # sh stcapp

  stcapp feature access- code

    malicious call ID ( MCID ) ***

    prefix **

    call forward all ** 1

    call forward cancel ** 2

    Local pickup group ** 3

    pickup different group ** 4

    meetme -conference ** 5

    pickup direct ** 6

    forward- to- voicemail ** 7

    cancel call waiting ** 8

  stcapp speed- dial feature disabled

  stcapp call- monitoring mode is mode feature

    # 1 - hangup last active call

    # 2 - transfer

    * 3 - conference

    # 4 - drop last conferee

    # 5 - toggle Between Two calls

I hope you do understand me, thanks!

Greetings!

I hope you do understand me, thanks!

Greetings!

good day to all engineers!

I have a polycom phone which another PBX ( Siemens) could do first conference marking the extention and then pressing the flash key and typed the extention * 3 copn this procedure to the conference .

We migrated the analog telephony with new VG350 , I found in internet commands to schedule conferences in VG350 , but I can not make the conference I can only transfer to other extensions , any suggestions on this?


these are the commands to enable itilice :

VG_AGS1_11 (config ) # stcapp call- monitoring mode feature
VG_AGS1_11 (config- stcapp - FMCODE ) # * 3 conference

VG_AGS1_11 (config- stcapp - FMCODE ) # end
VG_AGS1_11 feature code # sh stcapp feature code
 

stcapp feature access- code
   
malicious call ID ( MCID ) ***
 

prefix **
   
call forward all ** 1
   
call forward cancel ** 2
   
Local pickup group ** 3
   
pickup different group ** 4
   
meetme -conference ** 5
   
pickup direct ** 6
   
forward- to- voicemail ** 7
   
cancel call waiting ** 8

 
stcapp speed- dial feature disabled

 

stcapp call- monitoring mode is mode feature
   
# 1 - hangup last active call
   
# 2 - transfer
   
* 3 - conference
   
# 4 - drop last conferee
   
# 5 - toggle Between Two calls

I hope you do understand me, thanks!

Greetings!

I hope you do understand me, thanks!

Greetings!

346
Views
0
Helpful
0
Replies
CreatePlease to create content