Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to modify Location parameter via SOAP in CUCM

Hello,

Does anyone knows how to modify Audio bandwidth parameter in Locations via SOAP? Is there any example?

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: How to modify Location parameter via SOAP in CUCM

Hi


You would need to issue a SOAP updateLocation request, as per the AXL spec.


The interface spec is documented here: (http://developer.cisco.com/web/axl/docs - pick the appropriate spec for your CM version)


Are you new to SOAP, or do you have some existing SOAP scripts you use for another purpose? If so what language?


Aaron


Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
1 REPLY
Super Bronze

Re: How to modify Location parameter via SOAP in CUCM

Hi


You would need to issue a SOAP updateLocation request, as per the AXL spec.


The interface spec is documented here: (http://developer.cisco.com/web/axl/docs - pick the appropriate spec for your CM version)


Are you new to SOAP, or do you have some existing SOAP scripts you use for another purpose? If so what language?


Aaron


Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
156
Views
0
Helpful
1
Replies
CreatePlease to create content