Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to read CUCM trace log

Dear All

It's really hard to understand the CUCM trace log, is there any document can help to understand it ?

I know there is a sofeware VLT, it can translate the SDI trace file to easy understand form,but I think this is not good engough , and this software will not translate all the log.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: How to read CUCM trace log

Hello,

I have created this document that describes how to track an H.323 call in a CUCM trace:

https://supportforums.cisco.com/docs/DOC-11779

I plan to create documents for SCCP and SIP at some point in the future, but this should get you started with the basics of H.323.

If you find it helpful, or have questions on the doc please feel free to rate or leave comments.

-Jason

7 REPLIES
Cisco Employee

Re: How to read CUCM trace log

Not really, you only understand and learn how to read logs by experience or if you're lucky enough someone gives you some training on it.

VLT digests a lot of the messages and many times you'll miss the actual error.

The only real way to read a trace is just open it in a text editor.

Traces are really meant for TAC troubleshooting purposes, so that's why you won't find a doc titled "how to read and understand traces" in CCO.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Silver

Re: How to read CUCM trace log

Hello,

I have created this document that describes how to track an H.323 call in a CUCM trace:

https://supportforums.cisco.com/docs/DOC-11779

I plan to create documents for SCCP and SIP at some point in the future, but this should get you started with the basics of H.323.

If you find it helpful, or have questions on the doc please feel free to rate or leave comments.

-Jason

New Member

How to read CUCM trace log

What about using Triple Combo to help with reading the trace(s)?

Cisco Employee

How to read CUCM trace log

If you have no experience reading traces it might help you, however just as VLT, you'll get the digested version so chances are the error message won't show up or you don't see where it fails.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

When are you creating the

When are you creating the docs for SIP & SCCP ???

VIP Super Bronze

Hi,Please refer to the blog

Hi,

Please refer to the blog below to learn how to read sip traces..

https://supportforums.cisco.com/document/113271/understanding-sip-traces

There is not much to SCCP. SCCP is what cucm uses to talk to IP Phones and vice versa.

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

The doc for H.323 call

The doc for H.323 call tracing was brilliant. When would you be creating docs for SCCP & SIP ? We've been waiting forever for it

10067
Views
5
Helpful
7
Replies
CreatePlease to create content