Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to remove Manager/Assistant setting

In evaluating the Manager and Assistance feature of CallManager 4.2(3), I configured phones for the test that place a DND (Do Not Disturb) logo on the Manager's phone. Now I want to re-use th phone but can't seem to remove this graphic from the 7940's display.

Any Help?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: How to remove Manager/Assistant setting

See the following link.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmfeat/fsipma.html#wp1072189

Hope this helps. If so, please rate the post.

Brandon

4 REPLIES
VIP Purple

Re: How to remove Manager/Assistant setting

See the following link.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmfeat/fsipma.html#wp1072189

Hope this helps. If so, please rate the post.

Brandon

Community Member

Re: How to remove Manager/Assistant setting

Thanks, rather counter-intuitive...remove the IPMA services from the Assistant phone to clear up setting on the Manager phone .

I had already removed the users associated with the phones, so I had to re-create the Manager/Assistant relationship in order to remove the IPMA services.

Thanks again,

Charles

Cisco Employee

Re: How to remove Manager/Assistant setting

have you changed the phone button template for that phone to a normal one?

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: How to remove Manager/Assistant setting

Yes, I had change the phone button template. That controls the softkeys, but the backgrownd graphic associated with the Manager/Assistant configuration was persistant. The previous post to remove the IPMA services from the Assistant phone, cleared up the residual effects on the manager phone.

thanks,

273
Views
0
Helpful
4
Replies
CreatePlease to create content