Hello from Russia!
Q: How to reset Cisco Phone 7905 to factory default settings?
Standart Passwords, such as "12345" and "cisco" don't work.
Phone configured for use static IP-adress and TFTP-server settings is disable.
Hi! Default password is 1234, try it first.
If it doesn't help then try to reset:
1. Press **2. And then press the Yes softkey.
2. Press **#. Enter admin password, if asked, and then press the Enter softkey. Select Erase Configuration and press the Yes softkey and then press the Save softkey.
I am understand this, but:
I'm forgot password, and can't reset to default settings this phone.
1234 and other - don't work :(
if you have access to CCO downloads, you should try the recovery images for the 7902/05/12. In the zipfile there is documentation on how to do that.
hope this helps, please rate post if it does!
Hey, I know this document doesn't specify 7905 but take a look anyway:
It may or may not help but definitely take a read.
No, the 7940/60 (telecaster) reset procedures do not apply to 7902 / 05 / 12 that are based on ATA technology.
Again I'm not sure this will do it but the document is platform specific.
"Resetting the Cisco IP Phone
To reset the Cisco IP Phone, enter the following command from your web
where ipaddress is the IP address of the Cisco IP Phone that you are resetting."
Must be a way to do it - just don't give up!