Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to route outbound call to specific voice port

Hi everybody,

Now, I have Cisco IP phones, CUCM 8.5 and Cisco Voice GW 3945. My topo is following:

IP Phone ----SCCP----CUCM---H323---GW---FXOs---PSTN

So, I want IP Phone 1 is always routed outgoing on voice port 0/0/1 and IP Phone 2 is always routed outgoing on  voice port 0/0/2 and so on. Coud you recommend for me some solutions for this case?

Thanks

Thuc

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

How to route outbound call to specific voice port

Easiest way is to configure a prefix for the calls on CUCM (RP,RL wherever you want) and then just match the dial-peer on the GW with that prefix. Obviously you need to do some work with CSS/partitions to make this work.

Since it's an exact match it will be removed but you'll bind those calls to a specific port.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
3 REPLIES
New Member

Re:How to route outbound call to specific voice port

Hi,

See what caller id you get on the gateway by making a test call outbound and if you get phone A as 3001 and B as 3002 then try configuring dial-peer with incoming 3001 or 3002 and respective destination port.

Sent from Cisco Technical Support Android App

Cisco Employee

How to route outbound call to specific voice port

Easiest way is to configure a prefix for the calls on CUCM (RP,RL wherever you want) and then just match the dial-peer on the GW with that prefix. Obviously you need to do some work with CSS/partitions to make this work.

Since it's an exact match it will be removed but you'll bind those calls to a specific port.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

How to route outbound call to specific voice port

Thanks everyone. I will try them.

Thuc

403
Views
4
Helpful
3
Replies