¿How to set up a SPA8800 to call another SPA8800 thru IP?
I have two SPA8800 that I would like to interconnect through IP addresses.The two SPA8800 are in the same network with static IP addresses.One SPA8800 IP is 192.168.40.108 and the other SPA8800 is 192.168.40.109 .I want to make calls from one device to another.I am using the following Dial Plan (S0 <: 192.168.40.108>) in the 192.168.40.109 and vice versa.
The problem is that it doesn´t work all the time. It only works once in awhile
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...