Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to setup a conference call on a mgcp vg224?

We are attempting to setup a conference call on a vg224 port. We can conference in two parties, but the originator is dropped from the call. Using the hook-flash is creating a transfer and not a confrence? How do we set up a confrence on a vg224?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: How to setup a conference call on a mgcp vg224?

Hi charles,

You would need to use SCCP for these features to work;

Check out Table 1 from this VG224 doc (shows SCCP support for Conference);

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: How to setup a conference call on a mgcp vg224?

Hi charles,

You would need to use SCCP for these features to work;

Check out Table 1 from this VG224 doc (shows SCCP support for Conference);

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html

Hope this helps!

Rob

519
Views
0
Helpful
1
Replies
CreatePlease to create content