Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to setup Xcode adn Conf on CME PVDM based

I have NM-HDV with PVDM (not PVDM2)on my CME router. I don't know how to setup Xcoding and Conference for CME with PVDM.

Only PVDM-2 configuration guide for CME can be found.

Pls give me some advice?

2 REPLIES
Bronze

Re: How to setup Xcode adn Conf on CME PVDM based

Hi, you can check this.

Configuring DSP Farms for NM-HDVs

SUMMARY STEPS

1. enable

2. configure terminal

3. voice-card slot

4. dsp services dspfarm

5. exit

6. sccp local interface-type interface-number

7. sccp ccm ip-address priority priority-number

8. sccp

9. dspfarm transcoder maximum sessions number

10. dspfarm

Check this guide.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmetrnsc.html#wp1043651

Hope this help

David

New Member

Re: How to setup Xcode adn Conf on CME PVDM based

Thanks David.

I don't know what's the relationship between the CLI you enclosed and the belowing CLI under telephone-service:

sdspfarm units number

sdspfarm transcode sessions number

sdspfarm tag number device-number

364
Views
5
Helpful
2
Replies