Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to test V WIC2-2MFT-E1 without PSTN line ?

Is there any method that I installed V WIC2-2MFT-E1 on 2801 router and test, whether ports are working ?

Any help will be appreciated.

Thanks

4 REPLIES
Cisco Employee

Re: How to test V WIC2-2MFT-E1 without PSTN line ?

Hi,

You could use a T1 crossover cable to connect one port to the other (or back to back to another router), and configure the PRIs with one side emulating the network side and the other the user side, and then send a call through.

Regards,

Michael.

New Member

Re: How to test V WIC2-2MFT-E1 without PSTN line ?

Do you mean,

cross/cable

IP-phone--CM---2801<----------->2811

Do you mean like that or if can give me simple senario

thanks

Cisco Employee

Re: How to test V WIC2-2MFT-E1 without PSTN line ?

An example of simple scenario:

IP-Phone--CME--2801<--->2811--CME--IP-Phone

Make one side user and other network as described here:

http://www.cisco.com/en/US/docs/ios/12_1t/12_1t3/feature/guide/dt_q931.html

Regards,

Michael.

New Member

Re: How to test V WIC2-2MFT-E1 without PSTN line ?

Thanks Micheal.

176
Views
4
Helpful
4
Replies