How to upgrade the firmware of Cisco ATA-187 ?

[Noy-pi]

Hi,

Can someone share on how to upgrade the firmware of ATA-187? I found some documents for detailed procedure in upgrading ATA's firmware...but it is for ATA-186/188.

Thank you,

shawn

[Aman Soi]

Hi Shawn,

Refer this link.

http://www.ciscovoicebits.co.uk/upgrading-firmware-on-ata187

regds,

aman

[Chris Deren]

Search this forum for similar issue, assuming you have firmware 3.2.3 or below that is not upgrading to latest firmware as this is a known memory limitation.  You basically need to change the TFTPUrl on the http:///dev page and point it to a local TFTP running lets say on your PC with the modified config file.

HTH,

Chris

[Noy-pi]

hi aman,

thanks for the reply. however, the link you provided  shows how to upgrade ATA-187 using CallManager. I am using CME in this  case. Got any link on how to upgrade using CME?

regards,

shawn

[Aman Soi · Accepted solution]

Hi Shawn,

Please refer the link

https://supportforums.cisco.com/message/3791720#3791720

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeinstl.html#wp1067416

regds,

aman

[Noy-pi]

great aman

will try that one..