Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

How to verify the following in 7960 IP Phone?

Hi All,

How do I verify the following in 7960 IP Phone,

1. IP address of the phone

2. CME software version

3. Extension number

And how to access the GUI prompt of Cisco 7960 IP phone?

Thank you,

2 REPLIES
Cisco Employee

Re: How to verify the following in 7960 IP Phone?

you can use show commands:

Commands: show ss7 sm set through shutdown (voice-port)

http://www.cisco.com/en/US/docs/ios/12_3/vvf_r/vrg_sh4_ps1839_TSD_Products_Command_Reference_Chapter.html#wp1011792

Cisco Unified CME Commands: sast1 trustpoint through show fb-its-log

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_s1ht.html

The whole config guide

Cisco Unified Communications Manager Express System Administrator Guide

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html

To access phone GUI just type the IP of the phone in a browser

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Bronze

Re: How to verify the following in 7960 IP Phone?

Hi friend.

1. Settings->Network Configuration to check IP, Mask, Gateway, TFTP.

2. You can check only the firmware.

3. If the phone is configured, you can check directory number on the display of the phone.

To web access: http://IPPhone-IP

All the best

David

152
Views
10
Helpful
2
Replies
CreatePlease to create content