Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Hunstop functionality on dial-peers

                   Hello guys!

     I am trying to implement the hunstop command on dial-peers in order to force dial-peers to stop default hunting even if the voice port interface is down, but the hunting continues. For example, for the following two dial peers:

dial-peer voice 12 pots

huntstop

destination-pattern 130567734..

incoming called-number .T

direct-inward-dial

port 1/0:D <---- ( to local PBX )

forward-digits 4

!

dial-peer voice 26 voip

huntstop

destination-pattern 1305.......

voice-class codec 1

session protocol sipv2 <---- ( to SBC )

session target ipv4:172.20.11.10

session transport udp

tech-prefix 1

dtmf-interworking rtp-nte

If this router receives a call from PSTN to 3056773422 while link to PBX is down (port 1/0:D), the hunting continues to dial-peer voice 26 voip.

Why hunting is not stoping at dial-peer voice 12 pots?

Thanks in advanced guys!!

Everyone's tags (2)
1 REPLY
New Member

Hunstop functionality on dial-peers

Hello guys!

     Anyone had this kind of behaviour?

584
Views
0
Helpful
1
Replies