Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Hunt group for SCCP and SIP phone

Hello!

I`m use CUCME Version 7.0(1).

And I have cisco SCCP phone and Linksys SIP phone.

B-acd script used for call queue:

voice register dn  103
number 103
allow watch
name 103
voice register pool  4
id mac 000E.08D9.F9FC
number 1 dn 103
dtmf-relay sip-notify
username 103 password
codec g711alaw

voice hunt-group 10 sequential
list 103,106
timeout 7
pilot 300

application
service acd flash:/bacd/app-b-acd-2.1.2.2.tcl
  param queue-cme-debugs 1
  param aa-hunt1 300
  param aa-hunt2 103
  param queue-manager-debugs 1
  param number-of-hunt-grps 3
  param queue-len 30

But all work only for SCCP phone, for SIP phone I get error message

5304 989245420ms.2731 +-1 +1900 pid:20042 Originate A200A0002

dur 00:00:00 tx:0/0 rx:0/0 3   (no route to destination (3))

Telephony 50/0/14 (95304) [50/0/14.0] tx:0/0/0ms None noise:0dBm acom:0dBm

  long duration call detected:n long dur callduration :n/a timestamp:n/a336  : 9

It`s possible - use b-acd script for call queue with SCCP and SIP phone simultaneously?

337
Views
0
Helpful
0
Replies
CreatePlease to create content