I have an issue with a hunt group, my setup is I have a DN that hunts through multiple Devices. All the devices share the hunting DN's voicemail.
The problem is that at the end of the day they all forward their phones to voicemail, of course this just sends the hunt number round in a loop. Is there a way of telling the hunt number to go to voicemail if no numbers are available?
I have set this within the hunt pilot number, the voicemail does take affect form a no answer. If the phones are forwarded to voicemail the hunt number seems to cut in through the voicemail rendering the busy option useless.
Any suggestions on stopping it from cutting in through the voicemail?
Our organisation has one partition for all intenal phones. I have replaced my individual directory numbers with translation patterns to my hunt group. The individual numbers then have their own calling search space with newly created partitions they themselves are in. All the numbers use Hlog to move in and out of the hunt group and are able to transfer between themselves. Anyone outside of these numbers when trying to dial them hits the hunt group.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...