Just a quick query to ask, does anybody have any suggestions on how to manipulate a hunt group to only work for a specific time.
Scenario: Group of extensions that have a call fwd when busy / no answer on their UDP profiles to the hunt pilot. This works 24 hours a day. Now wish for the hunt group to stop working after 6pm and any calls for an extension goes âstraightâ to voicemailâ¦
I'm thinking along the lines of putting my hunt pilot in a partion with time periods / schedules created.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...