Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Hunt Group

We have different hunt pilot numbers  configured

 

If we call that hunt pilot number call is hitting the hunt list and the extension under that but on phone display ot is showing

 

From (calling number) for (Pilot number )

 

is there any possibility to make From ( calling number only )

5 REPLIES
Cisco Employee

Are you using CUCM or CME?

Are you using CUCM or CME? What is the version?

Does this message show up on all of the extensions? I've usually seen it only on the last extension of the hunt list.

New Member

Hi We are using Cucm version

Hi

 

We are using Cucm version 9.1.2

Display Hunt Pilot Name or DN

Display Hunt Pilot Name or DN for Hunt Group Calls When Alerting: Required Field     

This parameter is applicable for the calls routed using hunt lists. This parameter determines whether the hunt pilot Name or DN is displayed on line group members when the call is in the alerting state. Valid values specify True (display the hunt pilot name (if configured) or hunt pilot number (if hunt pilot name is not configured) along with the calling party information on line group members during alerting state - example: "From 'Calling Party Name' for 'hunt pilot Name'") or

False (display calling party name and number; do not display hunt pilot name or DN on line group members during alerting state - example: "From 'Calling Party Name' ('Calling Party Number')"). This parameter is applicable only during alerting state. Once the call is connected, the calling party information is displayed on the line group member answering the call irrespective of the value of this parameter - example: "From 'Calling Party Name' ('Calling Party Number')".
    This is a required field.
    Default:  True

 

Please Set the Serviceparameter to False

//Suresh Please rate all the useful posts.
New Member

Thanks a lot it worked

Thanks a lot it worked

Great, now you can mark this

Great, now you can mark this thread as "Answered"

//Suresh Please rate all the useful posts.
84
Views
5
Helpful
5
Replies