Hunt pilot and calling number view at incoming call
No problem. I ran into this recently so I dug into it a bit.
This functionality that was super important to one customer recently so we had to revert to Phone Firmware 8.4.4 on all the phones which in my case was 79XX series phones to get that behaviour working as they were accustom to.
I agree that this is not good because the first issue that crops up TAC is going to want us to upgrade.
I do not believe Cisco plans on making any changes to allow this to be modified at this time or in the near future, but I can not speak on their behalf. The best thing you can do is pass this product feature enhancement along to your Cisco Account team to convey the importance of this issue.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.