Hunt Pilot Forwarding issue over DN in PSTN number format
I have a setup of CUCM 8.6.
Below is the Diagram.
we have 4 clusters for India , Europe, US and APAC.
In India we have Delhi , Bangalore Mumbai and Kolkatta sites
I have created a Hunt Pilot in Cluster 1 India and added 2 Delhi directory numbers in Line group of Hunt List which added to Hunt Pilot also set forwarding of Hunt in case no answer and busy to Bangalore Location directory numbers as full Numner in PSTN format.
now the issue is when India users like delhi, mumbai,, kolkata dials the Hunt Pilot number, forwarding runs good in the case of no answer and busy on Hunt to the Bangalore Directory numbers
But when UK Users from Cluster 3 dial the Delhi Hunt Pilot calls not getting forwarded to Bangalore DN.
I have checked the Hunt Timer and forwarding, it seems OK.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.