Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

hunt-scheme in CME does not work?

Even I set hunt-scheme as least-used

It work as sequential

Does anyone test it

Here is my config;

trunk group T-TRUNK

hunt-scheme least-used

preemption enable

translation-profile incoming 1

translation-profile outgoing 12

capacity trunk-group update interval 10

capacity carrier update interval 10

!

!

dial-peer voice 444 pots

trunkgroup T-TRUNK

destination-pattern 444

!

!

voice-port 2/0/10

trunk-group T-TRUNK

voice-port 2/0/11

trunk-group T-TRUNK

voice-port 2/0/12

trunk-group T-TRUNK

3 REPLIES
Hall of Fame Super Gold

Re: hunt-scheme in CME does not work?

least-used uses a counter of calls per port, effectively equating to sequential.

May be you wanted to use least-idle.

New Member

Re: hunt-scheme in CME does not work?

I test all options;

least-idle

least-used

longest-idle

They dont work as I want;

I want to router to choose least used voice-port in time.

What is timeslot?

Is there any documentation?

Thanks

Hall of Fame Super Gold

Re: hunt-scheme in CME does not work?

http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_h1.html

If it doesn't work as described, you have to talk to the TAC.

383
Views
0
Helpful
3
Replies
CreatePlease login to create content