Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Hunting for the DS0 channels on each PRI set as “least idle”.

How to dedicate specific B channels (PRI)for a specific service.i.e how do i dedicate the first 15 B channels for In-only and the second 8 B channels for Out-only in 2821 Integrated VOICE Gateway Router.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Hunting for the DS0 channels on each PRI set as “least

You are welcome. Please remember to rate useful posts with the scrollbox below.

3 REPLIES
Hall of Fame Super Gold

Re: Hunting for the DS0 channels on each PRI set as “least

By default, calls from router to network takes the lowest free channel, from network to router the highest one.

It is never necessary to change this behavoir.

New Member

Re: Hunting for the DS0 channels on each PRI set as “least

Thanks a lot.

Hall of Fame Super Gold

Re: Hunting for the DS0 channels on each PRI set as “least

You are welcome. Please remember to rate useful posts with the scrollbox below.

115
Views
0
Helpful
3
Replies
CreatePlease to create content