hello i have an issue that you could be able to help me resolve
i have a couple of voip dial peers for redundancy
this is what i want to accomplish, when the voice gateway isn't able to route the call by using the 1st dial-peer I want the router to stop hunting the next possible matches. so if i call 11163171555 and if by some reason the gateway can send the call out by using dialpeer 9317. i don't want the gateway to try the next dial-peer. with the config shown below this isn't happening.
what else do i need to do ?
this is my configuration
dial-peer voice 9317 voip
translation-profile outgoing Voxitas huntstop destination-pattern 99611163171555 voice-class codec 2 session protocol sipv2 session target dns:18.104.22.168 no vad
dial-peer voice 9318 voip
translation-profile outgoing Voxitas destination-pattern 996T voice-class codec 2 session protocol sipv2 session target dns:22.214.171.124 no vad
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.