Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

HW compatibility Question

Hi

Does AIM-VOICE-30 in 3725 WIC slot support? I will not use any NM or EVM, just the integrate WIC slots

2 qty VIC-2BRI-S/T-TE

and

1 qty VIC-4FXS/DID

The following links mention general support but not btwn all three

http://www.cisco.com/en/US/prod/collateral/routers/ps282/product_data_sheet09186a008009203f.html

http://www.cisco.com/en/US/products/hw/routers/ps282/products_relevant_interfaces_and_modules.html

2 REPLIES
Hall of Fame Super Gold

Re: HW compatibility Question

Hi, good question. Not even the HW compatibility matrix mentions whic VIC are supported in the slots of the 37xx:

http://cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml

However, note the features available on AIM-VOICE-30 are not up to par with the latest DSP generation, so some people prefers to use a NM-HDV instead, that has PVDM2,

Hope this helps, please rate post if it does!

Cisco Employee

Re: HW compatibility Question

The AIM-VOICE-30 only supports E1 or T1 interfaces that are installed in the 3725 WIC slots. It cannot be used to provide DSP resources for the FXS or BRI ports.

Refer here for more details on the capabilities of the AIM-VOICE-30 module -

http://www.cisco.com/en/US/products/hw/modules/ps3115/products_data_sheet09186a0080088753.html#wp39993

To support the combination of the BRI and FXS cards, you will need at least two voice cards such as the NM-HD-2V

http://www.cisco.com/en/US/prod/collateral/modules/ps5365/product_data_sheet0900aecd801c595e.html

90
Views
0
Helpful
2
Replies