Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

HWIC Slots

a real easy one i guess, I have a 2811 with the HWIC 0 - 3 slots, can i put a vic2fxo in there? I was told you could but no joy at the moment :) ta guys

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: HWIC Slots

You are using a VIC-2FXO that not supported, as the router is telling you.

You need a VIC2-xFXO for the ISR routers.

As a recognition to whose providing answers, please rate useful posts!

6 REPLIES
Hall of Fame Super Gold

Re: HWIC Slots

Yes, but you also need a voice image and a minimum of PVDM2-8 to process voice.

Please rate post if it helps!

New Member

Re: HWIC Slots

I have a PVDM2-64 and c2800nm-spservicesk9-mz.124-3i.bin image is this not sufficient? Im a tad noob at this ;)

Hall of Fame Super Gold

Re: HWIC Slots

Do show diag and check if the voice card shows there. Report what it is exactly.

New Member

Re: HWIC Slots

Thanks:

WIC Slot 0:

FXO Voice daughter card (2 port)

WIC module not supported/disabled in this slot

Hardware revision 1.1 Board revision J0

Serial number 27623997 Part number 800-02495-01

FRU Part Number VIC-2FXO=

Test history 0x0 RMA number 00-00-00

Connector type Wan Module

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 0D 01 01 01 A5 82 3D 50 09 BF 01 00 00 00 00

0x30: 98 59 52 00 01 11 07 01 FF FF FF FF FF FF FF FF

Hall of Fame Super Gold

Re: HWIC Slots

You are using a VIC-2FXO that not supported, as the router is telling you.

You need a VIC2-xFXO for the ISR routers.

As a recognition to whose providing answers, please rate useful posts!

New Member

Re: HWIC Slots

Sorry for the delay much respect for the help!! well appreciated.

400
Views
0
Helpful
6
Replies